Adaptation to interfaces
The signal converters from HEIDENHAIN adapt the encoder signals to the interface, thereby boosting compatibility with the subsequent electronics. For greater flexibility in the application, signals can be interpolated, and different designs can be selected (e.g., housing, connector, top hat rail, or built-in version).
IBV 6000 series
- Incremental interface at the input (1 VPP)
- Various output configurations (1 VPP and/or TTL)
IBV 600, IBV 100, IBV 3000, and EXE 100 series
- Incremental interface at the input (1 VPP and/or 11 µAPP)
- Incremental interface at the output (TTL)
EIB 100 and EIB 3000 series
- Incremental interface at the input (1 VPP)
- Serial interface at the output (EnDat 2.2, Fanuc Serial Interface, Mitsubishi high speed serial interface)
EIB 2391S, EIB 3392S, and EIB 3391Y series
- Serial interface at the input (EnDat 2.2)
- Serial interface at the output (DRIVE-CLiQ / Yaskawa)
Angular measurement with greater accuracy
Benefit from real-time position calculation based on two scanning heads from rotatory HEIDENHAIN encoders without negative effects on the control loop. The EIB 1500 can compensate for errors such as shaft runout or the eccentric scale mounting of modular angle encoders.
EIB 1500 seriesSignal converters for high-accuracy angular measurement
- Interpolation and digitizing electronics for the real-time digital processing of positions from two scanning heads
- Input: incremental rotary HEIDENHAIN encoder with two scanning heads and distance-coded reference marks (relative orientation of scanning heads: 180° ± 5°)
- Output: EnDat 2.2, Fanuc Serial Interface, Mitsubishi high speed serial interface
- Integrated subdivision: 16 384-fold
Temperature measurement of direct drive motors
Monitor all three windings to attain greater cost effectiveness and overload protection for direct drive motors. Optimize the temperature measurement from up to three temperature sensors, and compensate for the temperature measurement timing behavior in ETEL direct drive motors.
EIB 5000 seriesSignal converters for temperature measurement in direct drive motors
- Reduced cabling
- Overload protection for direct drive motors
- Faster response behavior for excessive temperatures
- Greater cost-effectiveness
Computer-aided measurement
The signal converters are evaluation electronics that allow encoders to be connected to computer-aided applications requiring rapid measurement and high signal resolution. These applications include inspection stations, multi-gauging fixtures, and mobile data acquisition for machine calibration.
EIB 700 and IK 220 seriesSignal converters for computer-aided measurement
- Ideal as evaluation unit for high encoder signal resolutions and rapid measurement
- EIB 700: connection of multiple evaluation units with Ethernet transmission and, for example, wireless LAN transmission paths
- EIB 700: connection of up to four HEIDENHAIN encoders
- IK 220: PCI counter card
- IK 220: connection of up to two HEIDENHAIN encoders
